Marlon Hahn M. Sc.
Abteilungsleiter

Address:
Baroper Str. 303
MB III / Raum 4.021
Campus Süd
44227 Dortmund
Germany

Email:
This email address is being protected from spambots. You need JavaScript enabled to view it.
Phone:
+49 231 755 8415
Miscellaneous Information:

Veröffentlichungen

2019
Maaß, F., Hahn, M., Dobecki, M., Thannhäuser, E., Reimers, W., Tekkaya, A. E., 2019. Influence of tool path strategies on the residual stress development in single point incremental forming. In: Procedia Manufacturing 29, SHEMET 2019, Leuven, Belgium. DOI: 10.1016/j.promfg.2019.02.105
Tebaay, L. M.; Sieczkarek, P., Hahn, M., Gies, S., Tekkaya, A. E., 2019. Development of the incremental micro-forming process for small batch production of metallic bipolar plates. In: Ideen Form geben: 33. ASK Umformtechnik, 28-29.03.2019, Aachen, Germany.
2018
Hahn, M., Hansen, S. R. , Gies, S., Vivek, A., Daehn, G. S., Tekkaya, A. E., 2018. Prediction of Achievable Energy Deposition for Vaporizing Foil Actuators. 8th International Conference on High Speed Forming. 13.-16.05.2018, Columbus, USA.
Hahn, M., Gies, S., Tekkaya, A. E., 2018. Light enough or go lighter? Materials & Design163C, DOI: 10.1016/j.matdes.2018.107545
Lueg-Althoff, J., Schilling, B., Bellmann, J., Gies, S., Hahn, M., Schulze, S., Tekkaya, A. E., Beyer, E., 2018. Influence of the Free Compression Stage on Magnetic Pulse Welding of Tubes. 8th International Conference on High Speed Forming. 13.-16.05.2018, Columbus, USA.
Maaß, F., Hahn, M., Tekkaya, A. E., Dobecki, M., Poeche, A., Brömmelhoff, K., Reimers, W., 2018. Forming mechanisms-related residual stress development in single point incremental forming. Production Engineering, DOI: 10.1007/s11740-018-0867-3.
Sieczkarek, P., Wernicke, S., Hahn, M., Gies, S. and Tekkaya, A. E., 2018. Inkrementelle Blechmassivumformung: Entwicklung einer neuen Fertigungstechnologie, wt Werkstattstechnik online, 108(10), 679–685.
2017
Hahn, M., Ben Khalifa, N., Shabaninejad, A., 2017. Prediction of Process Forces in Fiber Metal Laminate Stamping. Journal of Manufacturing Science and Engineering (140). https://doi.org/10.1115/1.4038369.
Wollmann, T., Hahn, M., Wiedermann, S., Zeiser, A., Jaschinski, J., Modler, N., Ben Khalifa, N., Meißen, F., Paul, C., 2017. Thermoplastic fibre metal laminates: Stiffness properties and forming behaviour by means of deep drawing. Archives of civil and mechanical engineering 18, pp. 442-450.
Hahn, M., Gies, S., Tekkaya, A. E., 2017. Fügen durch Umformen. Forel-Akademie, 03.05.2017, Bielefeld, Germany.
2016
Hahn, M., Ben Khalifa, N., Wollmann, T., Jaschinski, J., Modler, N., Zeiser, A., Wiedemann, S., Meissen, F., 2016. Forming of Carbon Fibre-reinforced Metal Laminates in combination with injection moulding. The 5th International Lower Silesia - Saxony Conference - AutoMetForm 2016, 28.-29.06.2016, Wroclaw, Poland, pp. 105-110.
Hahn, M., Weddeling, C., Ben Khalifa, N., Shabaninejad, A., 2016. Springback Behavior of Carbon-Fiber-Reinforced Plastic Laminates with Metal Cover Layers in V-Die Bending. Journal of Manufacturing Science and Engineering 138 (12).
2015
Hahn, M., Weddeling, C., Lueg-Althoff, J., Tekkaya, A. E., 2015. Analytical Approach for Magnetic Pulse Welding of Sheet Connections. Journal of Materials Processing Technology. Volume 230, April 2016, Pages 131–142.
Hahn, M., Weddeling, C., Taber, G., Vivek, A., Daehn, G. S., Tekkaya, A. E., 2015. Vaporizing foil actuator welding as a competing technology to magnetic pulse welding. Journal of Materials Processing Technology. Volume 230, April 2016, Pages 8–20.
Tekkaya, A. E., Hahn, M., Hiegemann, L., Weddeling, C., Ben Khalifa, N., 2015. Umformen faserverstärkter thermoplastischer Kunststoff-Halbzeuge mit metallischen Deckblechen für den Leichtbau. 35. EFB-Kolloquium Blechverarbeitung 2015, Intermezzo der hybriden Werkstofflösungen - Hat Blech eine Zukunft?, Bad Boll, Germany, pp. 185-200.
2014
Vivek, A., Weddeling, C., Hahn, M., Daehn, G. S., Tekkaya, A. E., 2014. Eletrically driven plasma via vaporization of metallic conductors: A novel tool for joining tubular workpieces. In: Procedia CIRP Vol. 18, International Conference of Lightweight Components - ManuLight 2014, Dortmund, Germany.
Weddeling, C., Hahn, M., Daehn, G. S., Tekkaya, A. E. 2014. Uniform Pressure Electromagnetic Actuator - An innovative tool for magnetic pulse welding. In: Procedia CIRP Vol. 18, International Conference of Lightweight Components - ManuLight 2014, Dortmund, Germany.
2012
Brosius, A., Weddeling, C., Hahn, M., Tekkaya, A. E., 2012. Elektromagnetisches Schweißen von Aluminiumblechen. In: Neugebauer, R., Drossel, W-G. (Eds.), 4th International Conference on Accuracy in Forming Technology, ICAFT 2012, Verlag Wissenschaftliche Scripten, Auerbach, Germany, pp. 227-237.